Product overview: Fluke 376 True RMS AC/DC Clamp Meter with iFlex
Expand Your Measurement Range with Increased Flexibility
You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.
The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.
Safety Conformance
EN/IEC 61010-1:2001 1000V CAT III, 600V CAT IV
Key features
iFlex Flexible Current Probe expands the measurement range to 2500 A AC
CAT IV 600 V, CAT III 1000 V
True RMS AC voltage and current for accurate measurements on non-linear signals
Min, max, average and Inrush recording to capture variations automatically
Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty
Soft Carrying Case
|
Specifications: Fluke 376 True RMS
AC/DC Clamp Meter with iFlex® |
||
|
Electrical Specifications |
||
|
AC Current via Jaw |
|
|
|
Range |
374 and 375 376 |
600.0 A |
|
Resolution |
|
0.1 A |
|
Accuracy |
|
|
|
Crest Factor (50/60 Hz) |
|
3 @ 500 A (375 and 376 only) |
|
AC Current via Flexible Current Probe |
||
|
Range |
2500 A |
|
|
Resolution |
374 and 375 |
0.1 A (≤ 600 A) |
|
|
376 |
0.1 A (≤ 999.9 A) |
|
Accuracy |
|
3% ±5 digits (5 – 500 Hz) |
|
Crest Factor (50/60Hz) |
|
3.0 at 1100 A (375 and 376 only) |
|
DC Current |
|
|
|
Range |
374 and 375 376 |
600.0 A |
|
Resolution |
|
0.1 A |
|
Accuracy |
|
2% ± 5 digits |
|
AC Voltage |
|
|
|
Range |
374 and 375 376 |
600.0 V |
|
Resolution |
374 and 375 376 |
0.1 V |
|
Accuracy |
|
1.5% ± 5 digits (20 – 500 Hz) |
|
DC Voltage |
|
|
|
Range |
374 and 375 376 |
600.0 V 1000 V |
|
Resolution |
374 and 375 376 |
0.1 V |
|
Accuracy |
|
1% ± 5 digits |
|
mV dc |
|
|
|
Range |
375 and 376 |
500.0 mV |
|
Resolution |
|
0.1 mV |
|
Accuracy |
|
1% ± 5 digits |
|
Frequency via Jaw |
|
|
|
Range |
375 and 376 |
5.0 - 500.0 Hz |
|
Resolution |
|
0.1 Hz |
|
Accuracy |
|
0.5% ± 5 digits |
|
Trigger Level |
|
5 – 10 Hz, ≥10 A |
Models: Fluke 376 True RMS AC/DC Clamp Meter with iFlex
Fluke 376Fluke 376 True RMS AC/DC Clamp Meter with iFlex
Includes:
18-inch iFlex Flexible Current Probe
Coated Instruction Card
Safety Information Sheet
Soft Carrying Case
TL75 Test Leads
Two AA Alkaline Batteries
